Presentation visuals from approved AccuMark 3D garment views.
Gerber 3D, commonly used as AccuMark 3D, is an apparel development workflow for simulating 2D pattern pieces on an avatar. Pattern makers assemble a model with the required pieces, fabric data, images or artwork, placement, and sewing relationships, then review the virtual garment. The resulting view can support conversations about silhouette, drape, fit, construction, graphic placement, and trims before a physical sample or presentation image is selected.
Gerber 3D, commonly used as AccuMark 3D, is an apparel development workflow for simulating 2D pattern pieces on an avatar. Pattern makers assemble a model with the required pieces, fabric data, images or artwork, placement, and sewing relationships, then review the virtual garment. The resulting view can support conversations about silhouette, drape, fit, construction, graphic placement, and trims before a physical sample or presentation image is selected.
Gerber 3D is most useful to apparel pattern and development teams once the virtual sample has been prepared in the AccuMark workflow. The 3D workspace brings pattern pieces together around an avatar, while fabric properties, artwork, layers, placement, and sewing information influence the simulated garment. A carefully chosen on-avatar view can make a specific decision easier to discuss: use a full silhouette for a range review, a three-quarter view for proportion and drape, or a close view for a print, seam, button, zipper, or other trim detail.
RENDERCAD fits after the garment view has been reviewed and approved. Start with an export or a clean viewport capture that already shows the intended angle, pose, colorway, and level of detail. Use it to create a more composed apparel visual for a concept board, line review, merchandising brief, buyer discussion, or internal presentation. RENDERCAD can improve how the selected view is communicated, but it does not replace the garment simulation. Keep AccuMark 3D as the source of truth for pattern geometry, grading, sewing construction, avatar measurements, fabric behavior, and fit decisions.
In AccuMark 3D, complete the model before treating any image as presentation-ready. Confirm that the correct pattern pieces and quantities are included, assign the relevant fabric information and images, and define garment or body placement. In the 3D workspace, position pieces near their intended locations, set sewing relationships, and run the simulation. Review the result for the question at hand, such as the garment's overall fall, a graphic location, or a construction detail. If patterns or model data change, return to the simulation workflow and revalidate the view.
Then choose one approved camera angle with a clear communication goal and export or capture it at a useful scale. Bring that single view into RENDERCAD with a concise presentation direction, for example a clean studio-like apparel image, an editorial concept, or a focused merchandising composition. Use the output where a polished visual helps the conversation, while retaining the original AccuMark 3D simulation when technical teams need to inspect fit, pressure, drape, construction, or pattern changes.
Modeled by CADSharp in Onshape. Rendered with RENDERCAD.
Add | Change | or Remove referenced objects with the stroke of a brush.
RENDERCAD uses a maintained selection of image-generation models for different rendering tasks. Results can vary by model and input, so compare generated output with the source design before relying on geometry, materials, or dimensions.
| Feature | RENDERCAD | Competitor |
|---|---|---|
| Engine | Generative AI | Varies by tool |
| Output | Images + Video | Varies by tool |
| Resolution | HD / 4K | Varies by workflow |
| Image Speed | Image renders complete in 60 seconds. | Varies by scene/tool |
| Video Speed | Videos complete in 2-5 minutes. | Varies by workflow |
| Scene Set Up | No separate local scene | Varies by workflow |
| Input | Screen Snip | Varies by tool |
| Hardware | Cloud GPU | Often local GPU/CPU |
| Install | None | Varies (web or app) |
| Cost | from $9/mo | Varies widely |
Read the numbers. We trust you to know theirs.
Skip a separate local scene build. Pick a condition, material, and background while RENDERCAD handles the image-generation step. Image renders complete in 60 seconds.
™
RENDERCAD™
Use the browser workflow directly, capture a selected view with the desktop app, or start from the browser extension.
Get StartedCommon solutions for Gerber 3D users
Capture a clear view and describe the intended glow color, brightness, and surrounding light spill. Review the generated image because bloom and illumination can vary.
Add phrases like "Light from left," "Backlit," or "Top down lighting" to your custom prompt in RENDERCAD.
RENDERCAD videos are generated at 720p.
Submit a clear viewport screenshot to the web workflow instead of running a local scene render. The generation request runs in the cloud while your source application remains separate.
Open the current desktop app or browser extension, select the viewport region, and send the captured image into the screenshot-based workflow. Availability and device requirements are documented on the current download pages.
Use a high-resolution, clear input and Exact style, but expect generated text to drift. Add critical labels in a graphics editor after generation rather than relying on AI text fidelity.
It supports fast visual feedback from a clear viewport capture. Image renders complete in 60 seconds.
The current desktop app or browser extension can capture a selected viewport region and send that screenshot into the image workflow. The web upload path remains available without a CAD plugin.
Choose a background or describe the intended environment and lighting. Generated reflections and illumination are visual interpretations, not a scene-based light simulation.
4K is an optional output-resolution step. It increases pixel dimensions but does not restore missing source detail or guarantee print suitability.
It guides the video toward a looping transition. Review continuity after export because the first and last frames may still need editing.
Use only images you are authorized to submit. A style reference can guide lighting, composition, or general aesthetic, but it does not guarantee that the source design remains unchanged.